About Author

ZTE GPON Protection Service Configuration

by ShahedApril 16, 20160

ZTE GPON Protection Service Configuration [boxads] Today i will discuss how to configure ZTE GPON Protection Service. ZTE ZXA10 C220 provides GPON port protection by main and backup GPON ports switching mechanism. When the main GPON link is break, the backup takes over the GPON service automatically. ZXA10 C220 supports three types GPON port switch mechanisms: Force switch (high priority) Alarm-triggered switch (middle priority) Manual switch (low priority) Configuring GPON Protection Service: Prerequisites: Make sure that network device works normally. Make sure that VLAN is configured properly on uplink equipment. Make sure that GPON data service is configured successfully. Log …

by ShahedApril 16, 20163

Configuring ONU Service Connection in ZTE OLT [boxads] Today i will discuss how to Configuring ONU Service Connection in ZTE OLT. Prerequisites: Make sure that the network device works normally. Make sure that the GPON card works normally. Make sure that the GEM port is configured. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: ZXA10 C220 supports four types of service connection. 802.1p The upstream packets arrived on the UNI of an ONU are mapped to a GEM port according to UNI and 802.1p priority. UNI The upstream packets arrived on the UNI of an ONU are …

by ShahedApril 16, 20160

GEM Port Traffic Limit Configure in ZTE OLT [boxads] Prerequisites: Make sure that the network device works normally. Make sure that the GPON card works normally. The bandwidth profile is configured. The traffic profile is configured. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: GEM port is the minimum unit of downstream traffic which is identified by port ID. The downstream traffic is only effective when the schedule mode is based on ONU or GEM port. To configure the GEM port traffic limit, performs the following steps: Step-1. In the global configuration mode, use the gpon command …

by ShahedApril 16, 20160

GEM Port Configure ZTE OLT [boxads] Today i will discuss how to GEM Port Configure ZTE OLT. Prerequisites: Make sure network device works normally. Make sure GPON card works normally. Make sure T–CONT is configured. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: GEM port is the minimum unit of downstream traffic which is identified by port ID. To configure the GEM port, performs the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the interface command to enter the GPON-ONU interface configuration mode. Step-3. Use the gemport command to configure …

by ShahedApril 16, 2016April 16, 20160

T-CONT configure in ZTE GPON OLT [boxads] Today i will discuss how to T-CONT configure in ZTE GPON OLT. Prerequisites: Make sure that network device works normally. Make sure that GPON card works normally. Make sure that ONU is registered normally. Make sure that T-CONT profile is configured. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: T-CONT (Transmission Container) is the minimum unit of upstream bandwidth scheduling which is identified by Alloc ID. To configure the T-CONT, performs the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the interface command …

by ShahedApril 16, 20160

Traffic Profile Configure in ZTE OLT [boxads] Today i will discuss how to Traffic Profile Configure in ZTE OLT. Prerequisites: Make sure that the network device works normally. Make sure that the GPON card works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: A traffic profile defines the downstream bandwidth of a GEM port. To configure the traffic profile, performs the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the gpon command to enter the GPON configuration mode. Step-3. Use the traffic-profile command to configure traffic profile. Step-4. Use …