About Author

Link Aggregation Configure ZTE GPON OLT

by ShahedApril 27, 2016April 27, 20160

Link Aggregation Configure ZTE GPON OLT [boxads] Today i will be discuss how to Link Aggregation Configure ZTE GPON OLT. Prerequisites: Make sure that the network device works normally. Uplink ports work normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: LACP is a method to control the bundling of several physical ports together to form a single logical channel. LACP allows a network device to negotiate an automatic bundling of links by sending LACP packets to the peer (directly connected device that also implements LACP). The logical channel on the ZXA10 C220 is called smartgroup, which …

by ShahedApril 27, 2016April 27, 20160

TACACS Configure in ZTE OLT [boxads] Today i will be discuss how to TACACS Configure in ZTE OLT. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: TACACS+ is an AAA protocol. TACACS+ supports independent AAA functions, allowing different TACACS+ security servers to work as the authentication, authorization, and accounting servers. To configure the TACACS+, perform the following steps: 1. Use the configure terminal command to enter global configuration mode. 2. Use the tacacs enable command to enable TACACS+ function. 3. Use the tacacs-server host command to configure TACACS+ …

by ShahedApril 27, 20160

RADIUS Configure in ZTE OLT [boxads] Today i will be discuss how to RADIUS Configure in ZTE OLT. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: RADIUS is a standard AAA protocol. The ZXA10 C220 supports RADIUS authentication for Telnet user. To configure the RADIUS, perform the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the radius authentication-group command to configure RADIUS authentication group. Step-3. Use the server command to configure RADIUS server. Step-4. Use the algorithm command to configure RADIUS …

by ShahedApril 26, 2016April 26, 20160

Stack VLAN Configure in ZTE OLT [boxads] Today i will be discuss how to Stack VLAN Configure in ZTE OLT Prerequisites: Make sure that the network device works normally. The ONU is registered. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: In VLAN stacking application, when the ZXA10 C220 receives an upstream untag packet on the GPON-ONU port, it adds both PVID and CPVID (CVLAN PVID) to the packet. To configure the VLAN stacking, perform the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the interface command to enter the …

by ShahedApril 26, 20160

Configure VLAN Translate in ZTE OLT [boxads] Today i will be discuss how to Configure VLAN Translate in ZTE OLT. Prerequisites: Make sure that the network device works normally. The ONU is registered. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: According to VLAN translate rules, when the ZXA10 C220 receives upstream tag packets on the GPON-ONU port, it modifies the user VLAN tags to CVLAN tags and adds SVLAN tags to the packet. When the packets arrive at the port on the opposite end, the packets are sent to the user according to the CVLAN tags …

by ShahedApril 26, 20160

QinQ VLAN Configure in ZTE ONU [boxads] Today i will be discuss how to QinQ VLAN Configure in ZTE ONU. Prerequisites: Make sure that the network device works normally. The ONU is registered. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: According to VLAN QinQ rules, when the ZXA10 C220 receives upstream tag packets on the GPON-ONU port, it adds SVLAN tags to the packets. When the packets arrive at the port on the opposite end, the packets are sent to the user according to the user VLAN tags after the SVLAN tags are removed. To configure …