About Author

Number of ONT Ethernet ports has reached the maximum of the PON port

by ShahedApril 12, 2022March 17, 20230

Failure: The number of ONT Ethernet ports has reached the maximum of the PON port ONT add time OLT showing one error “The number of ONT Ethernet ports has reached the maximum of the PON port”. This issue only occurred when add ONT at PON port 0/1/2 , others PON port is normal when we add ONT. [boxads] Below are the example error : Gponsolution_OLT(config-if-gpon-0/1)#ont add 2 sn-auth 4857544xxx0A1042D omci ont-lineprofile-id 1 ont-srvprofile-id 1{ <cr>|desc<K>|ont-type<K> }: Command:ont add 2 sn-auth 4857544xxx0A1042D omci ont-lineprofile-id 1 ont-srvprofile-id 1Failure: The number of ONT Ethernet ports has reached the maximum of the PON port

by ShahedJanuary 21, 2022June 14, 20250

Failure: The Total Number of ONTs Is Beyond the System Limitation If anybody get “Failure: The Total Number of ONTs Is Beyond the System Limitation” message for ONT configure time from MA5608T MCUD/MCUD1 Board OLT then you need to upgrade OLT Firmware version, because number of connected ONTs depends on the OLT service boards & Control board Firmware Version. Also Different boards have different capabilities. Like For MA5608T OLT (MCUD/MCUD1 Board): • Before the V800R015C10 version supports: 2048 ONT• V800R015C10 and later version supports : 4096 ONT For MA56xx Series OLT control board Maximum supported ONT list: OLT Model Control …

by ShahedMarch 13, 2021April 6, 20220

Today I will discuss about Huawei OLT Board Status and Description, When New OLT power on, new board add or if reboot OLT then we see many board status in OLT like Failed, Auto_find, Auto_load, Config, or Normal etc state. We can see OLT board status by “display board 0″ or below command format. display board frameid [ frameid/slotid ] This command is used to query the information about the boards in an entire subrack or the details of a specified board. To query the slot ID, name, status, daughter board information, port information, and online/offline state of the board …

by ShahedDecember 19, 2020March 7, 20250

3rd-Party ONT Add Feature Unlock Huawei OLT to support other brand ONT in Huawei OLT. If anybody Interested & want to unlock Huawei OLT contact below. Skype: shahed.israr Telegram: https://t.me/Shahed_Israr Huawei OLT by default not support 3rd-party other brand ONT. If anybody configure other brand 3rd-party ONT in Huawei OLT. If ONT status shows offline. Also reason of offline: Insufficient ONT interoperability access license. Then you need to unlock your Huawei OLT. After OLT unlock its release lock & ONT status shows online. I have Below OLT Unlock solution:MA5600T/MA5680T/MA5603T/MA5683T: (SCUN/SCUK/SCUH) Firmware Version R015/R018MA5608T: (MCUD/MCUD1)Firmware Version R015/R018 MA5800-X2: (H901/H902 MPSC/MPSA/MPSG) Firmware …

by ShahedJune 12, 2020June 14, 20230

Illegal rogue ONT existent on a PON port: If Illegal rogue ONT existent on a pon port then what happened? Also what is a rogue ONT and how to prevent such an rogue ONT? If an ONT transmits optical signals to upstream at a timestamp that is not assigned to it, it is called a continuous-mode ONT. Such an ONT is also call the rogue ONT, which transmits optical signals at any time. When a rogue ONT exists: If the rogue ONT is online, one or all of the other ONTs connected to the same PON port on the OLT …

by ShahedApril 3, 2020April 7, 20222

Huawei ONT Wi-Fi Configure by U2000 This section describes how Huawei ONT Wi-Fi Configure through NMS (U2000). [boxads] Prerequisites The user has the operator authority or higher to configure ONT Wi-Fi. The OLT and the NMS communicate with each other properly. NMS is able to discover an online ONT and Internet access services are configured. ONT Wi-Fi Configure Procedure In the Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu. Choose GPON > GPON Management from the navigation tree. On the GPON ONU tab …