Huawei ONT Wi-Fi Configure by U2000

This section describes how Huawei ONT Wi-Fi Configure through NMS (U2000).

[boxads]

Prerequisites

• The user has the operator authority or higher to configure ONT Wi-Fi.
• The OLT and the NMS communicate with each other properly.
• NMS is able to discover an online ONT and Internet access services are configured.

ONT Wi-Fi Configure Procedure

1. In the Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.
2. Choose GPON > GPON Management from the navigation tree.
3. On the GPON ONU tab page, set the filter criteria or click to display the GPON ONUs.
4. Select an ONT in the normal state, right-click the ONT, and choose maintain ONT to configure ONT Wi-Fi remotely. Like follow below picture.
5. First on the navigation tree wifi configuration, click Query query information about SSIDs created for this ONT. Then Select a SSID and query information about Configuration in Detail, Advance Configuration, Authentication Configuration tab as per below picture.

Configuration in detail:

1. Select a specified SSID, then modify corresponding configuration items, and finally click Config to the device.
2. Parameter Description: SSID name Indicates the name of a wireless network. It is used to distinguish different wireless networks. It consists of a maximum of 32 characters, excluding Tab characters. Enable SSID Indicates whether to activate a connection. Associated Device Nubmer Specifies the number of connected wireless terminals. Range: 1-32. Broadcast SSID Enables or disables the SSID broadcast function. [bodyads]
3. If the option box is selected, it indicates that the SSID broadcast function is enabled. ONT periodically broadcasts its SSID.
4. If the option box is not selected, it indicates that the SSID broadcast function is disabled. The SSID is hidden, and wireless terminals cannot find this wireless network. The SSID can be obtained only by sending a request.WMM Enable Enables or disables multimedia.

Advance Configuration:

Select a specified SSID, modify corresponding configuration items, and click Config to the device.

Parameter Description: Transmitting Power Indicates the Tx power of wireless signals. Options: 20%, 40%, 60%, 80%, and 100%. A larger value indicates better coverage of wireless signals. Regulatory Domain Indicates the country code of a wireless network. Channel Indicates the channel of a wireless network. The channel varies with the value of region. Channel Width Indicates the length of a wireless frequency band. Options: auto 20/40 MHz, 20 MHz, and 40 MHz. Mode Indicates the supported wireless network mode. Options: 802.11b, 802.11g, 802.11b/g, or 802.11b/g/n.

Authentication Configuration:

Select a specified SSID, modify corresponding configuration items, and click Config to the device.

Parameter Description: Authentication Mode Indicates the authentication mode for a wireless terminal to request access to a wireless network. Options: Open, Shared, WPA Pre-Shared Key, WPA2 Pre-Shared Key, WPA/WPA2 Pre-Shared Key, WPA Enterprise, WPA2 Enterprise, and WPA/WPA2 Enterprise. The default value is Open, which indicates that a wireless terminal can access the network without authentication. Encryption Mode Indicates the encryption mode for a wireless terminal to request access to a wireless network. The encryption mode and encryption parameters vary with the authentication mode.

If the authentication mode is set to Open, the encryption mode can be set to None or WEP.

If authentication mode set to Shared, the encryption is WEP.

Authentication mode is set to WPA Pre-Shared Key, WPA2 Pre-Shared Key, WPA/WPA2 Pre-Shared Key, WPA Enterprise, WPA2 Enterprise, or WPA/WPA2 Enterprise, the encryption mode can be set to AES, TKIP, or TKIP&AES.

Comments

comments