by PHYHOME OLT Frequently used Commands
Today i will discuss about PHYHOME OLT Frequently used Commands.
Note:FHL1012B Common command line:
1. Create In-band Vlan:
maintenance\configure# manage vlan <vid> <portlist> [untagged|tagged]
2. Config In-band manage IP address:
maintenance\configure#manage ip <A.B.C.D/M> {<A.B.C.D>}
3. Show In-band management info:
maintenance# display manage vlan
4. In-band manage or delete IP Vlan:
maintenance\configure# manage vlan delete
5. Add users and config password:
maintenance\configure#user add <username> <login_password>
6. Delete users:
maintenance\configure# user delete <username>
7. Config users permission:
maintenance\configure#user role admin <username> <enable_password>
8.Show all users on the devices:
# who
[boxads]
9. Check version:
maintenance# display version
10. Display system running config:
# display running-configuration
11. Check the device running time:
# display time
12. Config system time:
# time <year> <month> <date> <HH:MM:SS>
13. Reboot the certain pon card or the system:
# reboot {[<slotlist>|system|backup]}
14. Open the blinding function between pon port and uplink port:
system\configure# community-group enable
15. show the status of pon port and uplink port:
system# display community-group state
16. Config the speed of uplink port and duplex mode:
system\configure#uplink speed [10m|100m|1000m] duplex [full|half] <portlist>
17. Display pon-status:
system# display pon-state <slotno> <ponno>
18. PON port isolate:
system\configure#pon [isolate|community] <slotlist> <ponlist>
19. config storm-control:
system\configure#storm-control [broadcast|multicast|unknown|all] [on|off] {<value>}
20. Manage ACL configure:
maintenance\configure#manage acl <acl_index> <A.B.C.D/M> [enable|disable]
21. Telnet service for ACL congig:
maintenance\configure telnet acl <acl_index> {<A.B.C.D/M>}*1 {[enable|disable]}
22. Enable or disable telnet:
maintenance\configure# telnet enable/disable
23. ONT auth:
ont\configure# ont-auth <ont_type><mac_address> <slotno> <auth_id>
24. Auth to show onu information:
ont# display ont-auth-info slotno <slotno> <onulist>
25. Delete onu Auth:
ont\configure#ont-auth-undo <slotno> <ontlist>
26. Show the info of the onu without Auth:
ont# display unauth-info <slotno> <ponno>
27. ONT port isolate:
ont\configure#isolate [enable|disable] <slotno> <onulist>
28. ONT ACL Config:
ont\configure#onu-acl <rule_id> action [permit|deny]
29. ONT FE port add the certain slo:
service\configure#service number <slotno> <onulist> <portno> <service_no>
30. Delete FE port’s config or port-blind:
service\configure#delete <slotno> <onuno> <portno> [service|bind] <1-16>
31. Config UNI port?VLAN:
service\configure#<slotno> <onulist> <port> <serviceno> [tag|transparent] <cos> <0-65535> <c_vlanlist>
32. Config VLAN of uplink:
vlan#vlan-database <name> <vidlist> <portlist> [untagged|tagged]
33. QinQ blind to FE port:
service\configure# service vlan <slotno> <onulist> <portno> <serviceno>
34 Send ONT FE port config:
service\configure# apply fe-service-compress-pkt <slotno> <onuno>
34. ONT FE port config showing:
service# display service info <slotno> <onuno>
35. Create QinQ template:
service\configure# qinq-description create <profile_name>
[bodyads]
36. Delete QinQ template:
service\configure#qinq-description parameter <profile_name> {<field_type> <field_val> <op>}
37. Vlan config of QinQ template:
service\configure#qinq-description service <profile_name> <service_name> <svlan_vid> <svlan_tpid> <svlan_cos>
38. PON port blinkd QinQ:
service\configure# pon_qinq [bind|unbind] <slotlist> <ponlist> <profile_name>
39. PON VLAN config:
vlan#pon_vlan <slot_list><pon_list><tag_vlan_list>
40. PON VLAN Mode config:
vlan#pon_vlan_mode <associated><independent>
41. Show FDB aging time:
fdb#display aging-time
42. FDB aging time config:
fdb# Aging-time <value>
43. Igmp function on or off:
igmp\configure#proxy [on|off]
44. IGMP Mode config:
igmp\configure#mode-set [snooping|proxy|off]
45. IGMP Agent IP config:
igmp\configure#proxy-ip <A.B.C.D>
46. Uplink IGMP VLAN on or off:
igmp\configure#uplink-vlan [on|off]
46. IGMP template create or delete:
igmp\configure#programme-package <name> [create|remove]
47. IGMP Add or delete:
igmp\configure#programme-package <name> [add|delete] {<group_address> [normal]}
48. Igmp VLAN info display:
igmp # display vlan
49. IGMP FE port info config:
igmp\configure#igmp port <slotno> <onu> <port>
Shahed
Hi! I am Shahed Israr. I try to help GPON Technology users with their queries and provide them with relevant and accurate information to the best of my ability. My main goal is to assist and enhance GPON Technology user and help people find the answers they're looking for quickly and easily.
Follow Me:
