About Author

Configure SIP-based FoIP Service Huawei OLT

by ShahedApril 12, 2012October 24, 20150

Configure SIP-based FoIP Service in Huawei OLT: This topic describes how to configure the SIP-based FoIP service. Prerequisites: The SIP-based VoIP service must be configured. For details, see Configuring the VoIP Service (SIP-based). The voice service port used for the FoIP service must be in the normal state, and the voice communication on the port must be normal. [boxads] Context: According to the fax coding mode, the FoIP service is classified into two modes: Transparent transmission fax: uses the G.711 coding. T.38 fax: uses the T.38 coding In the fax service application, according to whether the SIP signaling is involved …

by ShahedApril 11, 2012October 26, 20150

MG Interface Configure on Huawei OLT: This topic describes how to configure an MG interface for implementing the communication between the MA5600T/MA5603T/MA5608T (AG) and the MGC. [boxads] Context: The MA5600T/MA5603T/MA5608T communicates with the MGC through either the H. 248 or the MGCP protocol. One MA5600T/MA5603T/MA5608T can run only one protocol. One MA5600T/MA5603T/MA5608T supports up to eight MG interfaces. Each MG interface can be configured with the attributes (such as authentication and ringing mapping) independently. Procedure: Configure the Upstream VLAN Interface: This topic describes how to specify the upstream VLAN interface for the media stream and the signaling flow, and how …

by ShahedApril 11, 2012October 24, 20150

Huawei OLT VoIP Configure based on SIP and H.248 protocol: Today i will discuss how to Huawei OLT VoIP Configure based on SIP and H.248 protocol. [boxads] Prerequisite: The MA5600T/MA5603T must use the H.248 protocol to communicate with the MGC and use the SIP protocol to communicate with the IMS. The H.248 interface and the system parameters must be configured. For the related operations, see Configuring an MG Interface and (Optional) Configuring the System Parameters. The H.248 interface must be in the normal state. The SIP interface and the system parameters must be configured. For the related operations, see Configuring …

by ShahedApril 9, 2012October 24, 20150

Device Authentication Configure (MGCP-based): This topic describes how to configure the MGCP-based authentication parameters for the MG interface on the MA5600T/MA5603T/MA5608T to implement device authentication and prevent illegal MGs from registering with the MGC. [boxads] Prerequisite: The MG interface must be configured successfully. The parameters, are including the encryption type, initial key, DH authentication, and MG ID, must be configured on the MGC. This parameters must be the same as the parameters configured on the MA5600T/MA5603T/MA5608T. Procedure: Step 1: In the global config mode, run the interface mgcp command to enter the MG interface mode. Step 2: Run the …

by ShahedApril 9, 2012October 24, 20152

Device Authentication Configure GPON (H.248-based): This topic describes how to configure the H.248-based device authentication to prevent illegal MGs from registering with the MGC. [boxads] Prerequisite: The MG interface must be configured successfully. The parameters, including the encryption type, the initial key and the DH authentication, and the MG ID, must be configured on the MGC. These parameters must be the same as the parameters configured on the MA5600T/MA5603T/MA5608T. Precautions: If Huawei products such as the SoftX3000 is used as the MGC, the authentication MG ID must be a character string with more than eight bits. Procedure: Step 1: In …

by ShahedApril 6, 2012October 24, 20150

AAA Config Huawei OLT by HWTACACS protocol: Today i will show how to configure AAA in Huawei OLT by using HWTACACS protocol. [boxads] Service Requirements: The HWTACACS server performs authentication, authorization, and accounting for 802.1X access users. The user logs in to the server carrying the domain name. The HWTACACS server with the IP address 10.10.10.10 functions as the primary server for authentication, authorization, and accounting. The HWTACACS server with the IP address 10.10.10.11 functions as the secondary server for authentication, authorization, and accounting. Other parameters adopt the default settings. Technology Diagram: Procedure: Step 1: Configure the AAA authentication scheme. …