Shahed Israr

Shahed Israr is a Network Engineer specializing in GPON, FTTH, and telecom access network technologies. With hands-on experience in Huawei OLT and ONT configuration, U2000 NMS deployment, iMaster NCE-FAN Lite management systems, firmware upgrades, and advanced network troubleshooting, he helps Internet Service Providers (ISPs) and network professionals deploy, manage, and optimize fiber optic networks efficiently. Through GPON Solution, he shares practical technical guides, real-world solutions, and professional knowledge to support engineers working in modern GPON infrastructure.

Display Client Huawei OLT

by

Display Client Huawei OLT

Display Client command is used to query the information on the current login users. When you need to query the user number, IP address, and login time of the current login user to ease security management, run this command. [boxads]

Format:
display client

Modes:
Common user mode

Level:
Common user level

Usage Guidelines:
Using this command, you can view the current login users whose levels are equal to or lower than yours.

  • The super user can view the information about all the login users.
  • The administrator can view the information about the administrator users, operator users, and common users.
  • The operator can view the information about the operator users and common users.
  • The common user can view the information about the common users.

Example:
To query the current login users, do as follows:

Read more

Client Kickoff Huawei OLT

by

Client Kickoff Huawei OLT

Client Kickoff command is used to disconnect an end user. When the administrator needs to disconnect the user from the server if the insecurity operations of a user or users with the same level are found, run this command. After that, the user cannot perform any operation to the system. [boxads]

Format:

client kickoff clientid

Clientid: clientid Indicates the end user number. Each end user has the only number. When you need to disconnect the specified end user, use this parameter.

Read more

Clear Terminal user login failure

by

Clear Terminal user login failure:

Clear Terminal user login failure command is used to clear the information about the failed logins of all the users in the system. When you need to clear the information about the failed logins of all the users in the system, run this command. After the command is executed successfully, the information about the failed logins of all the users in the system is cleared. [boxads]

Format:

clear terminal user login failure

Parameters:

None

Modes:

Privilege mode

Level:

Super user level

Usage Guidelines

You can run the display terminal user login failure command to query the information about the failure login of the user in the system.

Read more

Board Series-name Huawei OLT

by

Board Series-name Huawei OLT

Board Series-name command is used to configure the alias function of the serialized boards. [boxads]

Before setting names for serialized boards, you must enable the alias function. After the function is enabled, you can set the alias for serialized boards when adding the boards offline. After the setting, the preset names are displayed as the default name of serialized boards.

Format:
board series-name { enable | disable }

Enable: Enables the alias function. To set names for serialized boards when adding the boards offline, use this parameter.

Disable: Disables the alias function. When you do not need to set names for serialized boards when adding the boards offline, use this parameter.

Read more

Root Password Recovery Huawei OLT

by

Root Password Recovery Huawei OLT Hi everybody, Today i will teach you how to Root Password Recovery Huawei OLT MA56xx series device. If the root Password of a Huawei OLT is lost/forget what you do? Huawei OLT default user is root & password is admin or admin123 After using the device, the user may change … Read more