ZTE GPON

Configure traffic statistics ZTE OLT

by

Configure traffic statistics ZTE OLT

[boxads]

Today i will discuss how to Configure traffic statistics ZTE OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

Traffic statistics is used to collect statistics on the packets of specific service flows. It counts quality and bytes of the packets arrived at the ingress port.

To configure the traffic statistics, perform the following steps:

Step-1. Use the configure terminal command to enter global configuration mode.
Step-2. Use the acl command to configure ACL.
Step-3. Use the rule command to configure ACL rule.
Step-4. Use the traffic-statistics in command to configure traffic statistics.
Step-5. Use the interface command to enter interface configuration mode.
Step-6. Use the ip access-group command to apply the ACL to port.

Read more

Configure Traffic Mirroring ZTE OLT

by

Configure Traffic Mirroring ZTE OLT

[boxads]

Today i will discuss how to Configure Traffic Mirroring ZTE OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

Traffic mirroring is to mirror traffic to assigned CPU or port in order to analyze and monitor packets.

To configure the traffic mirroring, perform the following steps:

Step-1. Use the configure terminal command to enter global configuration mode.
Step-2. Use the acl command to configure ACL.
Step-3. Use the rule command to configure ACL rule.
Step-4. Use the traffic-mirror in command to configure traffic mirroring.
Step-5. Use the interface command to enter interface configuration mode.
Step-6. Use the ip access-group command to apply the ACL to port.

Read more

Configure redirection ZTE OLT

by

Configure redirection ZTE OLT

[boxads]

Today i will discuss how to Configure redirection ZTE OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

Redirection modifies egress direction of packet according to traffic classification. The direction may be next hop, CPU or interface.

To configure the redirection, perform the following steps:

Step-1. Use the configure terminal command to enter global configuration mode.
Step-2. Use the acl command to configure ACL.
Step-3. Use the rule command to configure ACL rule.
Step-4. Use the redirect in command to configure redirection.
Step-5. Use the interface command to enter interface configuration mode.
Step-6. Use the ip access-group command to apply the ACL to port.

Read more

Queue Scheduling Configure ZTE OLT

by

Queue Scheduling Configure ZTE OLT

[boxads]

Today i will show how to Queue Scheduling Configure ZTE OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

Each physical port of the ZXA10 C220 supports eight (0 – 7) output queues, which are called CoS queues. The device performs operations on the output queues on the entry port according to the CoS queues corresponding to the packet 802.1p. When congestion occurs on the network, multiple packets may compete for one resource. Queue scheduling can solve this problem.

On the network side, the ZXA10 C220 supports three queue scheduling modes:

  • Fair–queue
  • SP
  • WRR

To configure the queue scheduling, perform the following steps:

Step-1. Use the configure terminal command to enter global configuration mode.
Step-2. Use the queue-mode command to configure network side queue schedule mode.

Read more

Priority Mark Configure ZTE ZXA10 C220 OLT

by

Priority Mark Configure ZTE ZXA10 C220 OLT

[boxads]

Today i will show how to Priority Mark Configure ZTE ZXA10 C220 OLT.

Prerequisites:

  • Make sure network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

Priority mark is used to allocate priority to certain packets according to traffic classification.
It supports the following operations:

  • Modify CoS queue and 802.1p value.
  • Modify CoS queue but not 802.1p value.
  • Modify DSCP value.
  • Modify drop precedence.

To configure the priority mark, perform the following steps:

Step-1. Use the configure terminal command to enter global configuration mode.
Step-2. Use the acl command to configure ACL.
Step-3. Use the rule command to configure ACL rule.
Step-4. Use the priority-mark in command to configure priority mark.
Step-5. Use the interface command to enter interface configuration mode.
Step-6. Use the ip access-group command to apply ACL to port.

Read more

Traffic Shaping Configure ZTE OLT

by

Traffic Shaping Configure ZTE OLT

[boxads]

Today i will be discuss how to traffic shaping configure ZTE OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

Traffic shaping controls the speed rate of the output packets so that the packets are sent at a constant speed. Traffic shaping is used to match the packet speed rate to that of the receiving device, to avoid congestion or packet discarding. Traffic shaping caches packets which exceed rate limit, to ensure that the packets are sent at a constant speed. Traffic shaping may cause delay.

To configure the traffic shaping, perform the following steps:

Step-1. Use the configure terminal command to enter global configuration mode.
Step-2. Use the interface command to enter the interface configuration mode.
Step-3. Use the qos traffic-shape command to configure traffic shaping.

Read more