About Author

Card Add Delete ZTE GPON OLT ZXA10 C220

by ShahedMarch 17, 2016March 17, 20161

Card Add Delete ZTE GPON OLT ZXA10 C220 [boxads] Today i will discuss how to Card Add Delete ZTE GPON OLT ZXA10 C220. Card Add ZTE GPON OLT Prerequisites: Make sure that network device works normally. Make sure that the shelf is configured. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: To configure the card, performs the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the add-card command to configure card. Note: The ZXA10 C220 identifies control switching cards automatically. The other cards are installed in slots 1 – 6 …

by ShahedMarch 17, 20160

ZTE OLT Rack Shelf Configure [boxads] Today i will discuss how to add ZTE OLT Rack Shelf by CLI mode. Rack Configure: Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: The ZXA10 C220 supports only one type of racks: ZXPON. To configure the rack, performs the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the add-rack command to configure rack. Note: The ZXA10 C220 supports only one rack at present, thus the rackno can only be 0. Step-3. Use the show …

by ShahedMarch 17, 2016March 17, 20160

ZTE OLT System Log Configure [boxads] Today i will discuss about how to ZTE OLT System Log Configure. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: To configure the system log, perform the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the syslog-server host command to configure system log server. Step-3. Use the logging on command to enable system log function. Step-4. Use the logging buffer command to configure log buffer size. Step-5. Use the logging console command to configure information …

by ShahedMarch 17, 2016March 17, 20161

ZTE OLT System Time Configure [boxads] Today i will discuss about ZTE OLT System Time Configure / NTP client configure. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: The ZXA10 C220/C300/C320 supports NTP and works as an NTP client. To configure the system time, performs the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the ntp enable command to enable NTP. Step-3. Use the ntp server command to configure NTP server. Step-4. Use the ntp interval-time command to configure NTP synchronizing …

by ShahedMarch 16, 2016March 16, 20163

ZTE GPON OLT SNMP Server Configure [boxads] Today i will discuss how to ZTE GPON OLT SNMP Server Configure in ZXA10 C220 & C300 series OLT. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: SNMP is essentially a request-reply protocol running over UDP (ports 161 and 162), though TCP operation is possible. SNMP is an asymmetric protocol, operating between a management station and an agent. The agent is the device being managed – all its software has to do is implement a few simple packet types and a …

by ShahedMarch 16, 2016March 17, 20161

ZTE ZXA10 C220 OLT NM Configuration [boxads] Today i will discuss about ZTE ZXA10 C220 OLT NM Configuration. ZXA10 C220 supports both in-band NM and out-of-band NM. In-band NM is implemented through uplink port. It is usually used in practical engineering. Out-of-band NM is implemented through the Q port on the control switching card. It is usually used in local management. Configuring In-Band NM: Prerequisites: Make sure the network device works normally. Log in to the ZXA10 C220 through HyperTerminal/Xshell/Putty. Background Information: In the in-band NM mode, NMS information is transmitted through service channel of ZXA10 C220. It is flexible …