October 11, 2024

Register Huawei ONT in Huawei OLT

How to Register Huawei ONT in Huawei OLT:

Today i will show how to register Huawei ONT in a Huawei OLT. Here i use Huawei MA5608T series OLT & EchoLife: HG851 ONT device. So let’s start our configuration part…………….[boxads]

Step-1: At first we search ONT serial number in our OLT discover list option by bellow command:

enable
config t
display ont autofind all

Look like bellow format in OLT:

ont autofind all - Register Huawei ONT
ont autofind all – Register Huawei ONT

Step-2: Now need to create a Service profile:

ont-srvprofile gpon profile-id 500 profile-name “Any-Name”         //here 500 is your profile id
ont-port pots 4 eth 4           //(4=pots RJ11 port, 4= eth port)
port vlan eth 1 2816           // 2816= vlan
commit

[adsense]

Look like bellow format in OLT:

Huawei ont-srvprofile create
Huawei ont-srvprofile create

Step-3: now we create Line profile:

config
ont-lineprofile gpon profile-id 500 profile-name “Any-Name”
tcont 4 dba-profile-id 11                    //11= dba profile
gem add 126 eth tcont 4                   //gem=126, tcont=4
gem mapping 126 0 vlan 2816       //gem=126 & 0=mapping index.
commit

Look like bellow format in OLT:

Huawei ont-lineprofile configure
Huawei ont-lineprofile configure

Step-4: Now we ADD ONT :

interface gpon 0/0
ont add 6 sn-auth 485754439BDF3102 omci ont-lineprofile-id 500 ont-srvprofile-id 500 desc “Any-description”

// here  6 sn-auth = pon port, which we got from discover list,    F/S/P      : 0/0/6]

Look like bellow format in OLT:

ONT Add Huawei OLT
ONT Add Huawei OLT

Step-5: Now we ADD native Vlan to the ONT Port

[bodyads]

interface gpon 0/0
ont port native-vlan 6 0 eth 1 vlan 2816            //PortID :6, ONTID :0, eth 1=ont’s port no.

Look like bellow format in OLT:

Huawei-OLT(config)#interface gpon 0/0

Huawei-OLT(config-if-gpon-0/0)#ont port native-vlan 6 0 eth 1 vlan 2816
{ <cr>|priority<K> }:

Command:
ont port native-vlan 6 0 eth 1 vlan 2816

Huawei-OLT(config-if-gpon-0/0)#

################################################################

Step-6: Vlan declare & pass it Uplink interface:

Huawei-OLT(config)#vlan 2816 smart

Huawei-OLT(config)#port vlan 2816 0/2 0

###############################################################

Step-7: Now we create Service port for that link:

service-port 500 vlan 2816 gpon 0/0/6 ont 0 gemport 126 multi-service user-vlan 2816 tag-transform translate inbound traffic-table index 3 outbound traffic-table index 3

Look like bellow format in OLT:

Huawei-OLT(config)#service-port 500 vlan 2816 gpon 0/0/6 ont 0 gemport 126 multi-service user-vlan 2816 tag-transform translate inbound traffic-table index 3 outbound traffic-table index 3

Huawei-OLT(config)#

###################################################################

Finally we complete that registration, Now we check that link by some command…………

Huawei-OLT(config)#display service-port 500

display service-port Register Huawei ONT
display service-port after Register Huawei ONT

Now we see that ONT state is UP

Please follow bellow my video Tutorial…..

Shahed

Hi! I am Shahed Israr. I try to help GPON Technology users with their queries and provide them with relevant and accurate information to the best of my ability. My main goal is to assist and enhance GPON Technology user and help people find the answers they're looking for quickly and easily.

Follow Me:
TwitterFacebookLinkedInPinterestGoogle PlusDiggYouTubeRedditDelicious

Visited 6,216 times, 1 visit(s) today

Comments

comments

Shahed

Hi! I am Shahed Israr. I try to help GPON Technology users with their queries and provide them with relevant and accurate information to the best of my ability. My main goal is to assist and enhance GPON Technology user and help people find the answers they're looking for quickly and easily.

View all posts by Shahed →

22 thoughts on “Register Huawei ONT in Huawei OLT

  1. Hi Shahed. I followed your your guide and was able to register an MA5626 MDU to the OLT. however, I am still unable to receive service on the 8 Port MDU. Should there be any further configurations on the MA5626 MDU for it to work?

  2. Sorry, i mistake something now i correct this section, It is depends for board list. Here my uplink card is 0/2/0.

    Huawei_OLT#display board 0
    ————————————————————————-
    SlotID BoardName Status SubType0 SubType1 Online/Offline
    ————————————————————————-
    0 H805GPFD Normal
    1 H805GPBD Normal
    2 H801MCUD Active_normal CPCA
    3
    4 H801MPWC Normal
    5
    ————————————————————————-

  3. hi ..
    i want to get optical info of an ONT in MA5680T OLT but i cant get any config which enable this facility in OLT.

    when i give command " display ont optical-info 0"
    it shows " Failure : Failedto process OMCI"

    Please comment.

  4. Hi Shahed,

    Do we have to always run "display ont autofina all"to see new ONT connected. There is no wal OLT shows a warning or alarm for New connected ONT if GPON port is in autofind mode

  5. Hi Shahed. Thanks for all the good information.
    Do you recommend the iManager? Do you have a product number for the Windows version? Several people have offered to provide the software at a range of prices but I'm skeptical.

    I tried your process to get an ONT online. I had to translate the commands to suit our hardware but it is still offline. The state shows "initial" Any suggestions?

  6. Thanks Shahed, I'll add you to skype. Can you recommend a document that describes the sequence to get the 5608 online? I have lots of information but it is more like an encyclopedia than describing a process.

    How is the U2000 for configuring a network? The website is not very clear on the hardware that is required to run the imanager for a small network.

  7. Hi Shahed,

    I have added you on Skype.. would like to engage you for some consulting training on Huawei MA5608T OLT and HG8310M ONT

  8. I have a problem in my ONU model is Huawei HG8546M well it doesn't work now only blink power. I accidentally put the configuration file of another Huawei model router to Huawei HG8546M. ONU

  9. Sorry, I have a question. I succesfull configurated the service in OLT, but for make it work I need to create a WAN in the ONT. This is allways like that??

    1. For gateway/wifi ONT you need to configure ONT WAN by web browser login direct, But you can use U2000 NMS for remote ONT wan configure without go customer home.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.

error: Content is protected !!