About Author

Display system user parameter

by ShahedNovember 5, 2015November 5, 20150

Display system user parameter Display system user parameter command is used to query the system parameters of the user. When you need to query the system parameters of the user (such as the lock object, the lock condition, the lock duration, the lock duration when the system is idle, whether the password is modified when the user logs in for the first time, the minimum length of the user name and the minimum length of the user password), run this command. [boxads] Format: display system user parameter Modes: Privilege mode Level: Administrator level Usage Guidelines: You can query the following …

by ShahedNovember 5, 2015November 5, 20150

Display system encoding Huawei OLT Display system encoding command is used to query the encoding mode of the system. After this command is executed successfully, the current encoding mode of the system is displayed on the interface. If you do not set the encoding mode of the system, the default encoding mode is displayed. [boxads] Format: display system encoding Modes: Common user mode Level: Operator level Usage Guidelines: Log in to the device and run this command to display the current encoding mode of the system. If you do not set the encoding mode of the system, the default encoding …

by ShahedNovember 5, 2015November 13, 20150

Display system declaration switch Display system declaration switch command is used to query the status of the law declaration switch. When you need to query whether the law declaration switch is enabled, run this command. [boxads] Format: Modes: Common user mode Level: Common user level Usage Guidelines: You can run the system declaration switch command to configure the law declaration switch. Example: To query the law declaration switch, do as follows: System Response: The system displays the message “Declaration switch : xx” after the command is executed successfully. “xx” is “On” or “Off”, depending on the actual state of the …

by ShahedNovember 5, 20150

Display section-details Huawei OLT Display section-details command is used to query the information about the types of all the registered and activated sections. To query the information about the types of all the registered and activated sections, run this command. [boxads] Format: display section-details Modes: Privilege mode Level: Common user level Example: To query the information about the types of all the registered and activated sections, do as follows: BD-Huawei#display section-details [global-config] <global-config> [device-config] <device-config> [public-config] <public-config>

by ShahedNovember 4, 20150

Display Client Huawei OLT Display Client command is used to query the information on the current login users. When you need to query the user number, IP address, and login time of the current login user to ease security management, run this command. [boxads] Format: display client Modes: Common user mode Level: Common user level Usage Guidelines: Using this command, you can view the current login users whose levels are equal to or lower than yours. The super user can view the information about all the login users. The administrator can view the information about the administrator users, operator users, …

by ShahedNovember 4, 2015November 4, 20150

Client Kickoff Huawei OLT Client Kickoff command is used to disconnect an end user. When the administrator needs to disconnect the user from the server if the insecurity operations of a user or users with the same level are found, run this command. After that, the user cannot perform any operation to the system. [boxads] Format: client kickoff clientid Clientid: clientid Indicates the end user number. Each end user has the only number. When you need to disconnect the specified end user, use this parameter.