Display system encoding Huawei OLT

Display system encoding command is used to query the encoding mode of the system. After this command is executed successfully, the current encoding mode of the system is displayed on the interface. If you do not set the encoding mode of the system, the default encoding mode is displayed. [boxads]

Format:
display system encoding

Modes:
Common user mode

Level:
Operator level

Usage Guidelines:

Log in to the device and run this command to display the current encoding mode of the system. If you do not set the encoding mode of the system, the default encoding mode is displayed.
You can run the system encoding command to set the encoding mode of the system.

Example:
To query the current encoding mode of the system, do as follows:

BD-Huawei>display system encoding
current system encoding : GBK

System Response:

The system displays the queried result when the command runs successfully.
The following table describes the parameters in response to the display system encoding command.

current system encoding: Indicates the encoding mode of the system. Enumerated type. Options: GBK, ISO8859-1, and UTF-8.

Shahed Israr

Shahed Israr is a Network Engineer specializing in GPON, FTTH, and telecom access network technologies. With hands-on experience in Huawei OLT and ONT configuration, U2000 NMS deployment, iMaster NCE-FAN Lite management systems, firmware upgrades, and advanced network troubleshooting, he helps Internet Service Providers (ISPs) and network professionals deploy, manage, and optimize fiber optic networks efficiently. Through GPON Solution, he shares practical technical guides, real-world solutions, and professional knowledge to support engineers working in modern GPON infrastructure.

Comments

comments