About Author

Load declaration Huawei OLT

by ShahedNovember 13, 20150

Load declaration Huawei OLT Load declaration command is used to load the law declaration file. The law declaration is the prompt or warning shown when a user logs in to the system. If the law declaration is set to be shown, the system shows the law declaration information when a user logs in to the system. In this case, the user is required to decide whether to accept the law declaration. After accepting the law declaration, the user can log in to the device. Otherwise, logging in to the device fails. [boxads] Format: load declaration { xmodem |tftp ServerIpAddress filename …

by ShahedNovember 9, 2015November 9, 20151

Display Terminal user command Huawei OLT There are several display terminal user command in huawei olt. bellow are the list of command which is related to terminal user. [boxads] display terminal user authentication-mode This command is used to query the configured authentication mode. Run the terminal user authentication-mode command to configure the authentication mode of the administrator. display terminal user info [ > { tftp | { ftp | sftp [ portid ] } usernamepassword } server-ipaddrfilename ] This command is used to query the change history of user information and permissions. The query result can be displayed in the …

by ShahedNovember 6, 2015November 9, 20150

Display terminal user Huawei OLT Display terminal user command is used to display the user attributes. To query the user authority, online user information, allowed re-login count, and contact information for a specified or all users, run this command. [boxads] Format: display terminal user { all | online | name username } display terminal user { expired-time { name username | all } } display terminal user login failure display terminal user locked [ all ]

by ShahedNovember 6, 2015November 6, 20150

Display terminal session max-number Display terminal session max-number command is used to query the maximum number of users who are permitted to log in through the CLI at a time. After the command is executed successfully, the system displays the maximum number of users who are permitted to log in through the CLI at a time. [boxads] Format: display terminal session max-number Modes: Privilege mode Level: Super user level Usage Guidelines: Run the terminal session max-number command to configure the maximum number of login users. Example: To query the maximum number of users who are permitted to log in through …

by ShahedNovember 6, 20150

Display terminal ip-address locked Display terminal ip-address locked command is used to query the locked IP address list. When you need to query the locked IP address list, run this command. This command can display locked information about user IP addresses and NMS IP addresses. [boxads] Format: display terminal ip-address locked Modes: Privilege mode Level: Administrator level Usage Guidelines: You can query the following parameters: The locked IP address The locked time The locked duration ( in the unit of minute) Example: To query the locked records about IP address list including NMS IP address, do as …

by ShahedNovember 6, 2015November 6, 20150

Display system user password exclude Display system user password exclude command is used to query the weak password in the system. When setting or modify a password, ensure that the password does not contain any weak password. [boxads] Format: display system user password exclude Modes: Common user mode Level: Common user level Example: To query the weak password in the system, do as follows: BD-Huawei>display system user password exclude —————————————————————————- No. Weak Password —————————————————————————- 0 abc 1 123 —————————————————————————- Total record(s) number: 2 System Response: The system displays the queried result when the …