Commands

Commands

Display system encoding Huawei OLT

by

Display system encoding Huawei OLT Display system encoding command is used to query the encoding mode of the system. After this command is executed successfully, the current encoding mode of the system is displayed on the interface. If you do not set the encoding mode of the system, the default encoding mode is displayed. [boxads] … Read more

Display system declaration switch

by

Display system declaration switch Display system declaration switch command is used to query the status of the law declaration switch. When you need to query whether the law declaration switch is enabled, run this command. [boxads] Format: Modes: Common user mode Level: Common user level Usage Guidelines: You can run the system declaration switch command … Read more

Display section-details Huawei OLT

by

Display section-details Huawei OLT Display section-details command is used to query the information about the types of all the registered and activated sections. To query the information about the types of all the registered and activated sections, run this command. [boxads] Format: display section-details Modes: Privilege mode Level: Common user level Example: To query the … Read more

Display Client Huawei OLT

by

Display Client Huawei OLT

Display Client command is used to query the information on the current login users. When you need to query the user number, IP address, and login time of the current login user to ease security management, run this command. [boxads]

Format:
display client

Modes:
Common user mode

Level:
Common user level

Usage Guidelines:
Using this command, you can view the current login users whose levels are equal to or lower than yours.

  • The super user can view the information about all the login users.
  • The administrator can view the information about the administrator users, operator users, and common users.
  • The operator can view the information about the operator users and common users.
  • The common user can view the information about the common users.

Example:
To query the current login users, do as follows:

Read more

Client Kickoff Huawei OLT

by

Client Kickoff Huawei OLT

Client Kickoff command is used to disconnect an end user. When the administrator needs to disconnect the user from the server if the insecurity operations of a user or users with the same level are found, run this command. After that, the user cannot perform any operation to the system. [boxads]

Format:

client kickoff clientid

Clientid: clientid Indicates the end user number. Each end user has the only number. When you need to disconnect the specified end user, use this parameter.

Read more

Clear Terminal user login failure

by

Clear Terminal user login failure:

Clear Terminal user login failure command is used to clear the information about the failed logins of all the users in the system. When you need to clear the information about the failed logins of all the users in the system, run this command. After the command is executed successfully, the information about the failed logins of all the users in the system is cleared. [boxads]

Format:

clear terminal user login failure

Parameters:

None

Modes:

Privilege mode

Level:

Super user level

Usage Guidelines

You can run the display terminal user login failure command to query the information about the failure login of the user in the system.

Read more