GPON

MA5801 OLT Board info

by

MA5801 OLT Board info: The MA5801 OLT is an integrated OLT. Its universal interface board, control board, service board, and upstream interface board are software virtualized modules, and its subrack ID, slot ID, and port ID are defined by software. For detailed definitions, see the following table. Service Subrack Range of Subrack ID MA5801 0 … Read more

Huawei ONT WiFi Configure

by

Huawei ONT WiFi Configure: Huawei EG8145V5 model ONT is used as an example to configure Huawei ONT Wifi. 1. Log in ONT WebUI of the EG8145V5. (To login Huawei HG8145V5 ONT, Open your web browser and type the default IP Address 192.168.100.1 in the address bar, then you should see the ONT login page with … Read more

Service Profile create by iMaster NCE-FAN NMS

by

Service Profile create by iMaster NCE-FAN NMS Today I will give example how to Create Service Profile by iMaster NCE-FAN NMS. Its just example, you need to configure profile by use your VLAN & which port you want to configure which VLAN. Follow below step by step process: 1. Log in your iMaster NCE-FAN NMS … Read more

Number of ONT Ethernet ports has reached the maximum of the PON port

by

Failure: The number of ONT Ethernet ports has reached the maximum of the PON port

ONT add time OLT showing one error “The number of ONT Ethernet ports has reached the maximum of the PON port”. This issue only occurred when add ONT at PON port 0/1/2 , others PON port is normal when we add ONT. [boxads]

Below are the example error :

Gponsolution_OLT(config-if-gpon-0/1)#ont add 2 sn-auth 4857544xxx0A1042D omci ont-lineprofile-id 1 ont-srvprofile-id 1
{ <cr>|desc<K>|ont-type<K> }:

Command:
ont add 2 sn-auth 4857544xxx0A1042D omci ont-lineprofile-id 1 ont-srvprofile-id 1
Failure: The number of ONT Ethernet ports has reached the maximum of the PON port

Read more