Huawei OLT VLAN Type mux | smart | standard | super
[boxads]
Today i will discuss about Huawei OLT VLAN type, Their are four types of vlan in huawei olt which is mux, smart, standard & super vlan.
Format: vlan vlanid [ to end-vlanid ] [ mux | smart | standard | super ] vlan vlan-list [ mux | smart | standard | super ] undo vlan vlanid [ to end-vlanid ] undo vlan vlan-list
MUX VLAN:
A MUX VLAN can contain multiple upstream ports, but only one service port. The service ports of different VLANs are isolated from each other. The system maps the VLAN to the user. Therefore, users can be differentiated by the VLANs.
Today i will show you how GPON FTTH ONT Configure by U2000 NMS & configure the high-speed Internet service when an ONT is connected to an OLT through a GPON port.
Networking:
The PC gains access to the Internet in PPPoE dialup mode.
The ONT is connected to the GPBC card of the OLT through an optical fiber.
The broadband remote access server (BRAS) provides broadband user access and functions of authentication and accounting.
GPON FTTH ONT Configure U2000 NMS
Data plan:
data-plan-for-gpon-ftth-ont-configure-u2000-nms
GPON FTTH ONT Configure Procedure:
Configure a DBA profile.
Configure a line profile.
Configure a service profile.
Configure an MEF IP traffic profile.
Configure a service VLAN on the OLT side.
Services Provision of GPON FTTH ONT Configure:
Add an ONT.
Configure an ETH port of the GPON ONU.
Add a service virtual port on the OLT side.
Implement pre-configurations:
1.Configure a DBA profile:
Choose Configuration > Access Profile Management from the main menu. In the dialog box that is displayed, choose PON Profile > GPON Profile from the navigation tree.
Click the DBA Profile tab.
Right-click and choose Add Global Profile from the shortcut menu.
In the dialog box that is displayed, set the parameters.
Name: ftth_dba
DBA Type: Assured Bandwidth/Maximum Bandwidth
Assured bandwidth: 8 Mbit/s
Maximum bandwidth: 20 Mbit/s
configure-dba-profile-by-u2000-nms
Click OK.
In the information list, right-click the record and choose Download to NE from the shortcut menu.
In the dialog box that is displayed, select the required NE(s), and click OK.
Today i will show you how to H.248 VoIP Service Configure Via U2000 NMS. The OLT is connected to the remote ONT through a GPON port to provide users with the IP-based high-quality and low-cost VoIP service.
Prerequisites:
The interface data and POTS user configuration data corresponding to the MG interface have been configured on the MGC.
The OLT has been connected to the MGC. The OLT can ping the IP address of the MGC server successfully.
Different voice services require different ONT software versions. Before the configuration, ensure that the current ONT software version supports H.248. For details, see relevant ONT manuals.
Data Plan:
Data Plan for H.248 VoIP Service Configure
H.248 VoIP Service Configure Procedure:
1.Configure a traffic profile.
Run the display traffic table ip command to query the existing traffic profiles in the system. If the existing traffic profiles in the system do not meet the requirements, run the traffic table ip command to add a traffic profile.
Set the profile name to ftth_voip and do not limit the upstream and downstream rates. Set the priority to 5 and packets are scheduled according to the priority carried.
Gponsolution(config)#traffic table ip name ftth_voip cir off priority 5 priority-policy local-setting
2. Configure the mapping relationship between a GEM port and a VLAN.
The service flow of user VLAN 40 is mapped to GEM port 12 in the ONT line profile.
