Card Reset ZTE OLT & Swapping Main/Backup Card

Card Reset ZTE OLT & Swapping Main/Backup Card

[boxads]

Today i will discuss how to Card Reset ZTE OLT & Swapping Main/Backup Card.

Card Reset ZTE OLT:

Prerequisites:

• Make sure network device works normally.
• Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

A card is reset in the following scenarios.

• The card is faulty.
• The card version is upgraded.

To reset the card, performs the following steps:

Step-1. Use the reset-card command to reset card.

Example: Reset the card in slot 5.

ZXAN#reset-card slotno 5
Confirm to reset card? [yes/no]:y

[bodyads]

Swapping Main/Backup Card:

Prerequisites:

• Make sure that the network device works normally.
• Both main control switching card and backup control switching cards work normally.
• Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

When there is a fault on the control switching card or version upgrading, swap the main and back control switching cards.

To swap main/backup control switching cards, performs the following steps:

Step-1. Use the swap command to swap main/backup control switching cards.

Example: Swap the main control switching card and the backup control switching card.

ZXAN#swap
Confirm to master swap? [yes/no]:y

Shahed

Hi! I am Shahed Israr. I try to help GPON Technology users with their queries and provide them with relevant and accurate information to the best of my ability. My main goal is to assist and enhance GPON Technology user and help people find the answers they're looking for quickly and easily.

Follow Me:

Comments

comments