How to Configure ONT Wi-Fi Access Service by U2000 | Page 2 of 2 | GPON Solution
April 3, 2020   Huawei Config, ONT, U2000   2 Comments

How to Configure ONT Wi-Fi Access Service by U2000

  1. If the option box is not selected, it indicates that the SSID broadcast function is disabled. The SSID is hidden, and wireless terminals cannot find this wireless network. The SSID can be obtained only by sending a request.WMM Enable Enables or disables multimedia.
    1. Advance Configuration:Select a specified SSID, modify corresponding configuration items, and click Config to the device. Parameter Description Transmitting Power Indicates the Tx power of wireless signals. Options: 20%, 40%, 60%, 80%, and 100%. A larger value indicates better coverage of wireless signals. Regulatory Domain Indicates the country code of a wireless network. Channel Indicates the channel of a wireless network. The channel varies with the value of region. Channel Width Indicates the length of a wireless frequency band. Options: auto 20/40 MHz, 20 MHz, and 40 MHz. Mode Indicates the supported wireless network mode. Options: 802.11b, 802.11g, 802.11b/g, or 802.11b/g/n.
    2. Authentication Configuration:Select a specified SSID, modify corresponding configuration items, and click Config to the device. Parameter Description Authentication Mode Indicates the authentication mode for a wireless terminal to request access to a wireless network. Options: Open, Shared, WPA Pre-Shared Key, WPA2 Pre-Shared Key, WPA/WPA2 Pre-Shared Key, WPA Enterprise, WPA2 Enterprise, and WPA/WPA2 Enterprise. The default value is Open, which indicates that a wireless terminal can access the network without authentication. Encryption Mode Indicates the encryption mode for a wireless terminal to request access to a wireless network. The encryption mode and encryption parameters vary with the authentication mode.
    • If the authentication mode is set to Open, the encryption mode can be set to None or WEP.
    • If the authentication mode is set to Shared, the encryption is WEP.
    • If the authentication mode is set to WPA Pre-Shared Key, WPA2 Pre-Shared Key, WPA/WPA2 Pre-Shared Key, WPA Enterprise, WPA2 Enterprise, or WPA/WPA2 Enterprise, the encryption mode can be set to AES, TKIP, or TKIP&AES.
  • NOTE:
    • NMS don’t support to query and reset password ONT Wi-Fi.
    • NMS don’t support to new add and delete SSID.
    • For Wi-Fi password change through the NMS, the carrir needs to formulate management rights with end uers.
email

Shahed

Hi! I am Shahed. I currently work as a Sr. Network Engineer. I want to build up my carrier in Networking field.

Follow Me:
TwitterFacebookLinkedInPinterestGoogle PlusDiggYouTubeRedditDelicious

How to Configure ONT Wi-Fi Access Service by U2000 was last modified: April 3rd, 2020 by Shahed

Comments

comments

Related posts:

Default ThumbnailH.248 VoIP Service Configure Via U2000 NMS Default ThumbnailHuawei GPON U2000 NMS Setup Preparation Default ThumbnailU2000 Huawei iManager U2000 NMS BUY for GPON

Powered by YARPP.

Pages: 1 2

, ,

2 Responses to How to Configure ONT Wi-Fi Access Service by U2000

  1. GUILLERMO VICENTE SALAS MACIAS says:
    May 25, 2020 at 7:01 am

    Hi, it is possible to change the wpa/wpa2 password from telnet/ssh ?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.

error: Content is protected !!