Shahed Israr

Shahed Israr is a Network Engineer specializing in GPON, FTTH, and telecom access network technologies. With hands-on experience in Huawei OLT and ONT configuration, U2000 NMS deployment, iMaster NCE-FAN Lite management systems, firmware upgrades, and advanced network troubleshooting, he helps Internet Service Providers (ISPs) and network professionals deploy, manage, and optimize fiber optic networks efficiently. Through GPON Solution, he shares practical technical guides, real-world solutions, and professional knowledge to support engineers working in modern GPON infrastructure.

VLAN Add ZTE ZXA10 C220 GPON OLT

by

VLAN Add ZTE ZXA10 C220 GPON OLT

[boxads]

Today i will be discuss how to configure / VLAN Add ZTE ZXA10 C220 GPON OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

VLAN is used to isolate ports on a device by dividing ports to different network segment logically.

To add the VLAN, perform the following steps:

Step-1. Use the configure terminal command to enter global configuration mode.
Step-2. Use the vlan command to add single VLAN.
Step-3. Use the vlan database command to enter VLAN batch configuration mode.
Step-4. Use the vlan command to add multiple VLANs.
Step-5. Use the show vlan command to query VLAN configuration.

Example of VLAN Add ZTE ZXA10 C220 GPON OLT:

Add VLAN 2.
ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#vlan 2
ZXAN(config-vlan)#end

Read more

Configure H.248 VoIP Service in ZTE OLT

by

Configure H.248 VoIP Service in ZTE OLT:

[boxads]

Today i will discuss how to Configure H.248 VoIP Service in ZTE OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • The GPON card works normally.
  • The corresponding VoIP resource data is configured on the SS.
  • The in-band NM IP address of the ZXA10 C220 is configured.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Networking Diagram:

Below figure shows the H.248 VoIP service networking diagram.

Configure H.248 VoIP Service networking diagram
Configure H.248 VoIP Service networking diagram

Data Configuration:
Below table describes the H.248 VoIP service data configuration.

H.248 VoIP Service data configuration
H.248 VoIP Service data configuration 2

Read more

Configure SIP VoIP Service ZTE OLT

by

Configure SIP VoIP Service in ZTE OLT:

[boxads]

Today i will discuss how to Configure SIP VoIP Service in ZTE OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Make sure that the GPON card works normally.
  • The corresponding VoIP resource data is configured on the SIP server.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Networking Diagram:
Bellow figure shows the SIP VoIP service networking diagram.

Configure SIP VoIP Service networking diagram
Configure SIP VoIP Service networking diagram

Configuration Data:
Below Table describes the SIP VoIP service configuration data.

Configure SIP VoIP Service configuration data 1Configure SIP VoIP Service configuration data

Read more

Configure CDR Parameters in ZTE OLT

by

Configure CDR Parameters in ZTE OLT

[boxads]

Today i will discuss about how to Configure CDR Parameters in ZTE OLT.

Prerequisites:

  • Make sure network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

Table 16 describes ranges and default values of CDR global parameters.

Configure CDR Parameters in ZTE OLT 1Configure CDR Parameters in ZTE OLT 2

To configure the CDR parameters, perform the following steps:

1. Use the configure terminal command to enter global configuration mode.
2. Use the iptv cdr enable command to enable global CDR function.
3. Use the iptv cdr max-records command to configure CDR maximum records.
4. Use the iptv cdr report command to report CDR manually.
5. Use the iptv cdr report-interval command to configure CDR automatic report interval.
6. Use the iptv cdr report-threshold command to configure CDR automatic report threshold.
7. Use the iptv cdr create-period command to configure CDR generating period.
8. Use the iptv cdr deny-right command to enable or disable CDR function when user right is deny.
9. Use the iptv cdr prw-right command to enable or disable CDR function when user right is preview.
10. Use the iptv cdr prw-overcount command to enable or disable CDR function when user preview count is over limit.
11. Use the iptv cdr clear command to clear CDR record.
12. Use the show iptv cdr command to query CDR configuration.

Read more

CAC Configure in ZTE OLT

by

CAC Configure in ZTE OLT

[boxads]

Today i will discuss how to CAC Configure in ZTE OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Make sure that the data service is configured.
  • Make sure that theIPTV package is configured.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context:

To configure the CAC, perform the following steps:

1. Use the configure terminal command to enter global configuration mode.
2. Use the iptv cac command to enable global CAC function.
3. Use the interface command to enter the GPON-ONU interface configuration mode.
4. Use the iptv service start command to start IPTV service on the interface.
5. Use the iptv right-mode command to enable or disable the authentication on the interface.

Note: By default, the authentication enabled.

6. Use the iptv-mode command to configure interface right mode.

Note: The default right mode is package.

Read more

IPTV Package configure in ZTE GPON OLT

by

IPTV Package configure in ZTE GPON OLT

[boxads]

Today i will discuss about how to IPTV Package configure in ZTE GPON ZXA10 C220 OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Make sure that the multicast source exits in the uplink network.
  • Make sure that the MVLAN is configured.
  • Log in to ZXA10 C220 through HyperTerminal or Telnet.

Context:

To configure the IPTV package, perform the following steps:

1. Use the configure terminal command to enter global configuration mode.
2. Use the iptv channel mvlan group command to configure IPTV channels.
3. Use the iptv view-profile command to configure preview profile.

preview profile parameters:

preview profile parameters

4. Use the iptv channel view-profile command to apply preview profile to channel.
5. Use the iptv packgae name command to create IPTV package.
6. Use the iptv packgae channel command to configure IPTV package channels.

Read more