GPON

Default username and password for Huawei echolife ONT

by

Default username and password for Huawei echolife HG8240/HG8245/HG8247 ONT:

Today i will discuss about default username and password for Huawei echolife HG8240/HG8245/HG8247 ONT. [boxads]

Question-1: What is the default user name and password for Huawei ont ?

Answer: By default, administrator mode,

Username: telecomadmin, Password: admintelecom,

Common user, User name: root, Password: admin

Question-2: What is the default IP address and Subnet Mask of huawei ont ?
Answer: IP address: 192.168.100.1, Subnet mask: 255.255.255.0

Question-3: If we want to connect a PC with Huawei ONT, how to set IP address and subnet mask of the PC?
Answer: Set the IP address of the PC to be in the same subnet as the LAN IP address of the HG8240/HG8245/HG8247.

Read more

Optical Splitter Loss Ratio 1:N

by

Optical Splitter Loss Ratio 1:N: Fiber Optic Splitters are used to divide the input optical fiber light at a certain ratio and send them to output parts. Optical coupler is an optical device that combines or splits power from optical fibers. [boxads] 1:N Fiber optic Splitter loss ratio chart are given bellow: Fiber optic splitter … Read more

Display ONT info in Huawei OLT

by

How to display ONT info in Huawei OLT:

Here i will show you how to display ONT info by bellow command……….

[boxads]

At first go to interface mode then type display ont info  ONT id  Port id

look like bellow:

Huawei-OLT(config)#interface gpon 0/0

Huawei-OLT(config-if-gpon-0/0)#display ont info 6 0
—————————————————————————–
F/S/P                                 : 0/0/6
ONT-ID                             : 0
Control flag                       : active
Run state                           : online
Config state                       : normal
Match state                        : match
DBA type                            : SR
ONT distance(m)              : 1267
ONT battery state              : not support
Memory occupation          : –
CPU occupation                 : –

Read more

Display Service-port by Filtering Huawei OLT

by

How to see Service-port by Filtering Huawei OLT:

At first login your Huawei OLT and go to config mode. Then type service-port related bellow command.

[boxads]

Huawei-OLT(config)#display service-port all

It will show all service port by INDEX/Service-port wise in your OLT.

display service-port all

Huawei-OLT(config)#display service-port all sort-by port

Read more

Lscable Alarm list LST20016 OLT

by

Lscable Alarm list LST20016 OLT:

[boxads]Bellow are the list of Lscable ONT alarm in OLT…………

1 CPU_LOAD -cpu load: when cpu Load is higher than threshold value(default: 70 Unit:%).
2 MEM_LOAD -memory load: when memory Load is higher than threshold value(default: 80 Unit: %).
3 TEMP_HIGH -temperature high: when temperature is higher than “High temperature threshold”(default : 100).
4 TEMP_LOW -temperature low: when temperature is lower than “Low temperature threshold”(default :-20).
5 DHCP_THRESHOLD -dhcp threshold The number of IPs of DHCP pool is over threshold.
6 DHCP_SHORTAGE -dhcp shortage there is no room for IP alignment.
7 UNIT_OUT -unit out Unit is out of chassis.
8 UNIT_FAIL -unit fail Unit status is fail.
9 UNIT_MISMATCH -unit mismatch: The Unit type is mismatched between pre-configured and actual unit type.
10 FAN_FAIL -fan fail FAN Fail.
11 SFP_OUT -sfp out When SFP Module is pulled out.
12 LINK_DOWN -link down link Oper status is down.
13 TX_LOAD -tx load Tx portload is higher than threshold.
14 RX_LOAD -rx load Rx portload is higher than threshold.
15 SELF_LOOP_DETECT -self loop detect .

Lscable Alarm list LST20016 OLT
Lscable Alarm list LST20016 OLT

Read more