System declaration switch

System declaration switch command is used to set the law declaration switch. To enable users to acknowledge and accept the law declaration so as to avoid illegal operations, run this command. After this command is executed successfully, the status of the law declaration switch is changed to the specified status (enable or disable). [boxads]

Format:

on-off: Sets the law declaration switch.

Enumerated type. Options: enable, and disable.

enable: displays the law declaration after the user logs in.
disable: displays no law declaration after the user logs in.

This command use Administrator level & Privilege mode.

Usage Guidelines:

You can run the display system declaration switch command to query the status of the law declaration switch.

Example:

To enable the law declaration switch, do as follows:

System Response:

The system does not display any message after the command is executed successfully.

Shahed Israr

Shahed Israr is a Network Engineer specializing in GPON, FTTH, and telecom access network technologies. With hands-on experience in Huawei OLT and ONT configuration, U2000 NMS deployment, iMaster NCE-FAN Lite management systems, firmware upgrades, and advanced network troubleshooting, he helps Internet Service Providers (ISPs) and network professionals deploy, manage, and optimize fiber optic networks efficiently. Through GPON Solution, he shares practical technical guides, real-world solutions, and professional knowledge to support engineers working in modern GPON infrastructure.

Comments

comments