Troubleshooting command

Huawei ONT LED Status & it’s Function

by

Huawei ONT LED Status & it’s Function:

There are many LEDs in Huawei ONT. Such as CATV, WPS, WLAN, USB, TEL1 – TEL2, LAN1 – LAN4, LOS/PON, POWER. We can simply troubleshoot by follow Huawei ONT LED Status. So at first we need to introduce with every ONT LEDs & it’s function. So let’s go…….[boxads]

Huawei ONT LED Status and it Function
Huawei ONT LED Status and it Function

NOTE:
In the preceding table, if the LED status is marked “Blinking” but the frequency is not specified, it indicates that the blinking frequency of the LED is determined by the data traffic transmitted.

Read more

Command for checking & Troubleshooting LS-cable ONT

by

Command for checking & Troubleshooting LS-cable ONT:

#.Verify ont reg-list:

Ls-OLT#sh gpon onu reg-list 8/1                      [ N.B: 8/1=PON interface ]

Output:
8/1 5 LSED10030174 S-ONT  Complete(s)  Profile_Name  Desc_Name

[boxads]

#.Verify MAC Address against interface & vlan mode.

Troubleshooting LS-cable ONT- MAC Address against interface & vlan
Troubleshooting LS-cable ONT- MAC Address against interface & vlan

Read more

Huawei OLT Board List details

by

Huawei OLT Board List

Today i will discuss about Huawei OLT Board. Their are many type of board in Huawei OLT, such as control board, service board, Power board etc. [boxads]

Here is the Huawei MA5603T OLT running board example

Huawei olt board
Huawei olt board

Bellow are the list of Huawei OLT Board:

ADI        32-channel ADSL2+ over ISDN service board
ADK        64-channel ADSL2+ over ISDN service board
ADL        32-channel ADSL2+ over POTS service board
ADP        64-channel ADSL2+ over POTS service board
ADQ        64-channel ADSL2+ over ISDN service board
ASP        64-channel VoIP POTS service board
H801MPWC   DC Power Interface board
H801MPWD   AC Power Interface board
H801MPWE   DC Power Interface board
H801PRTA   DC Power Interface board
H801PRTE   DC Power Interface board
H801PRTG   DC Power Interface board
H801SCUN   Control board

Read more

Show all Registered Huawei ONT Serial Number

by

Show all Registered Huawei ONT Serial Number in single PON port:

Today i will show how to Display all Registered Huawei ONT Serial Number in single PON port.

[boxads]

Login & go to interface mode & type bellow command.

Huawei-OLT(config)#interface gpon 0/0

Huawei-OLT(config-if-gpon-0/0)#display ont info 3 all 

[Note: Here it show all Registered ONT Serial Number in PON port 3.]

Read more

Display Huawei ONT Configuration in Huawei OLT

by

Display Huawei ONT Configuration in Huawei OLT:

Today i will show how to display huawei ONT Configuration in Huawei OLT.

At first login your OLT & go to interface mode and type bellow command.

[boxads]

Huawei-OLT(config-if-gpon-0/0)#display ont info 3  1

It you show all configuration status of a single ont, Which ONT id is 1 & also show Line profile & Service profile.

[Note: here 3= Pon Port & 1=ONT ID]

Look Like bellow format in OLT:

Huawei-OLT(config-if-gpon-0/0)#display ont info 3 1
—————————————————————————–
F/S/P                      : 0/0/3
ONT-ID                  : 1
  Control flag           : active
  Run state               : online
  Config state           : normal
  Match state           : match
DBA type               : SR
ONT distance(m)        : 1094
ONT battery state       : not support
Memory occupation   : –
CPU occupation          : –
Temperature             : –
Authentic type          : SN-auth+password-auth
SN                               : 485754B5FVBB002 (HWTC-9BDBB002)
Password                   : 0x31323334353600000000(123456)
Management mode         : OMCI
Software work mode       : normal
Isolation state                   : normal
ONT IP 0 address/mask   : 10.0.1.212/8
Description                  : ONT_Description
Last down cause         : dying-gasp
Last up time                : 2014-08-26 17:15:50+08:00
Last down time          : 2014-08-26 17:14:54+08:00
Last dying gasp time      : 2014-08-26 17:14:54+08:00
ONT online duration     : 13 day(s), 6 hour(s), 49 minute(s), 8 second(s)
Type C support               : Not support

Read more

Default username and password for Huawei echolife ONT

by

Default username and password for Huawei echolife HG8240/HG8245/HG8247 ONT:

Today i will discuss about default username and password for Huawei echolife HG8240/HG8245/HG8247 ONT. [boxads]

Question-1: What is the default user name and password for Huawei ont ?

Answer: By default, administrator mode,

Username: telecomadmin, Password: admintelecom,

Common user, User name: root, Password: admin

Question-2: What is the default IP address and Subnet Mask of huawei ont ?
Answer: IP address: 192.168.100.1, Subnet mask: 255.255.255.0

Question-3: If we want to connect a PC with Huawei ONT, how to set IP address and subnet mask of the PC?
Answer: Set the IP address of the PC to be in the same subnet as the LAN IP address of the HG8240/HG8245/HG8247.

Read more