About Author

Display terminal ip-address locked

by ShahedNovember 6, 20150

Display terminal ip-address locked Display terminal ip-address locked command is used to query the locked IP address list. When you need to query the locked IP address list, run this command. This command can display locked information about user IP addresses and NMS IP addresses. [boxads] Format: display terminal ip-address locked Modes: Privilege mode Level: Administrator level Usage Guidelines: You can query the following parameters: The locked IP address The locked time The locked duration ( in the unit of minute) Example: To query the locked records about IP address list including NMS IP address, do as …

by ShahedNovember 6, 2015November 6, 20150

Display system user password exclude Display system user password exclude command is used to query the weak password in the system. When setting or modify a password, ensure that the password does not contain any weak password. [boxads] Format: display system user password exclude Modes: Common user mode Level: Common user level Example: To query the weak password in the system, do as follows: BD-Huawei>display system user password exclude —————————————————————————- No. Weak Password —————————————————————————- 0 abc 1 123 —————————————————————————- Total record(s) number: 2 System Response: The system displays the queried result when the …

by ShahedNovember 5, 2015November 5, 20150

Display system user parameter Display system user parameter command is used to query the system parameters of the user. When you need to query the system parameters of the user (such as the lock object, the lock condition, the lock duration, the lock duration when the system is idle, whether the password is modified when the user logs in for the first time, the minimum length of the user name and the minimum length of the user password), run this command. [boxads] Format: display system user parameter Modes: Privilege mode Level: Administrator level Usage Guidelines: You can query the following …

by ShahedNovember 5, 2015November 5, 20150

Display system encoding Huawei OLT Display system encoding command is used to query the encoding mode of the system. After this command is executed successfully, the current encoding mode of the system is displayed on the interface. If you do not set the encoding mode of the system, the default encoding mode is displayed. [boxads] Format: display system encoding Modes: Common user mode Level: Operator level Usage Guidelines: Log in to the device and run this command to display the current encoding mode of the system. If you do not set the encoding mode of the system, the default encoding …

by ShahedNovember 5, 2015November 13, 20150

Display system declaration switch Display system declaration switch command is used to query the status of the law declaration switch. When you need to query whether the law declaration switch is enabled, run this command. [boxads] Format: Modes: Common user mode Level: Common user level Usage Guidelines: You can run the system declaration switch command to configure the law declaration switch. Example: To query the law declaration switch, do as follows: System Response: The system displays the message “Declaration switch : xx” after the command is executed successfully. “xx” is “On” or “Off”, depending on the actual state of the …

by ShahedNovember 5, 20150

Display section-details Huawei OLT Display section-details command is used to query the information about the types of all the registered and activated sections. To query the information about the types of all the registered and activated sections, run this command. [boxads] Format: display section-details Modes: Privilege mode Level: Common user level Example: To query the information about the types of all the registered and activated sections, do as follows: BD-Huawei#display section-details [global-config] <global-config> [device-config] <device-config> [public-config] <public-config>