Display Huawei ONT Configuration in Huawei OLT | GPON Solution

Display Huawei ONT Configuration in Huawei OLT

Display Huawei ONT Configuration in Huawei OLT:

Today i will show how to display huawei ONT Configuration in Huawei OLT.

At first login your OLT & go to interface mode and type bellow command.

Huawei-OLT(config-if-gpon-0/0)#display ont info 3  1

It you show all configuration status of a single ont, Which ONT id is 1 & also show Line profile & Service profile.

[Note: here 3= Pon Port & 1=ONT ID]

Look Like bellow format in OLT:

Huawei-OLT(config-if-gpon-0/0)#display ont info 3 1
—————————————————————————–
F/S/P                      : 0/0/3
ONT-ID                  : 1
  Control flag           : active
  Run state               : online
  Config state           : normal
  Match state           : match
DBA type               : SR
ONT distance(m)        : 1094
ONT battery state       : not support
Memory occupation   : –
CPU occupation          : –
Temperature             : –
Authentic type          : SN-auth+password-auth
SN                               : 485754B5FVBB002 (HWTC-9BDBB002)
Password                   : 0x31323334353600000000(123456)
Management mode         : OMCI
Software work mode       : normal
Isolation state                   : normal
ONT IP 0 address/mask   : 10.0.1.212/8
Description                  : ONT_Description
Last down cause         : dying-gasp
Last up time                : 2014-08-26 17:15:50+08:00
Last down time          : 2014-08-26 17:14:54+08:00
Last dying gasp time      : 2014-08-26 17:14:54+08:00
ONT online duration     : 13 day(s), 6 hour(s), 49 minute(s), 8 second(s)
Type C support               : Not support
—————————————————————————–
Line profile ID          : 216
Line profile name    : Description
—————————————————————————–
FEC upstream switch  :Disable
OMCC encrypt switch :Off
Qos mode                      :PQ
Mapping mode             :VLAN
Tr069 management    :Disable
—————————————————————————–
Notes: * indicates Discrete TCONT(TCONT Unbound)
—————————————————————————–
<T-CONT   0>          DBA Profile-ID:1
<T-CONT   3>          DBA Profile-ID:11
<Gem Index 36>
——————————————————————–
|Serv-Type:ETH |Encrypt:off |Cascade:off |GEM-CAR:-            |
|Upstream-priority-queue:0  |Downstream-priority-queue:-       |
——————————————————————–
Mapping VLAN  Priority Port   Port  Bundle  Flow  Transparent
index                  type   ID    ID      CAR
——————————————————————–
0       25    –        –      –     –       –     –
——————————————————————–
<Gem Index 65>
——————————————————————–
|Serv-Type:ETH |Encrypt:off |Cascade:off |GEM-CAR:-            |
|Upstream-priority-queue:0  |Downstream-priority-queue:-       |
——————————————————————–
Mapping VLAN  Priority Port   Port  Bundle  Flow  Transparent
index                  type   ID    ID      CAR
——————————————————————–
0       2028  –        –      –     –       –     –
——————————————————————–
—————————————————————————–


Service profile ID   : 216
Service profile name : Description
—————————————————————————–
Port-type     Port-number
—————————————————————————–
POTS          4
ETH            4
TDM           0
MOCA        0
CATV          0
—————————————————————————–
TDM port type                       : E1
TDM service type                  : TDMoGem
MAC learning function switch         : Enable
ONT transparent function switch   : Disable
Multicast forward mode             : Unconcern
Multicast forward VLAN            : –
Multicast mode                             : Unconcern
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : –
Upstream IGMP packet priority     : –
Native VLAN option                    : Concern
Upstream PQ color policy          : –
Downstream PQ color policy     : –
—————————————————————————–
Port-type Port-ID QinQmode  PriorityPolicy Inbound     Outbound
—————————————————————————–
ETH       1       unconcern unconcern      unconcern   unconcern
ETH       2       unconcern unconcern      unconcern   unconcern
ETH       3       unconcern unconcern      unconcern   unconcern
ETH       4       unconcern unconcern      unconcern   unconcern
—————————————————————————–
Notes: * indicates the discretely configured traffic profile
—————————————————————————–
Port-type Port-ID Dscp-mapping-table-index
—————————————————————————–
ETH            1       0
ETH            2      0
ETH            3      0
ETH            4      0
IPHOST     1       0
—————————————————————————–
Port   Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP      S-PRI
type   ID                                                           POLICY
—————————————————————————–
ETH    1    Translation  1          25    –          25     –     –          –
ETH    2    Translation  1     2028   –     2028     –     –          –
—————————————————————————–
Notes: * indicates transparent attribute of the vlan
—————————————————————————–
Port-type  Port-ID    IGMP-mode         IGMP-VLAN  IGMP-PRI  Max-MAC-Count
—————————————————————————–
ETH              1    –                         –         –      Unlimited
ETH              2    –                         –         –      Unlimited
ETH              3    –                         –         –      Unlimited
ETH              4    –                         –         –      Unlimited
—————————————————————————–
Alarm policy profile ID         : 0
Alarm policy profile name    : alarm-policy_0
—————————————————————————–

email

Shahed

Hi! I am Shahed. I currently work as a Sr. Network Engineer. I want to build up my carrier in Networking field.

Follow Me:
TwitterFacebookLinkedInPinterestGoogle PlusDiggYouTubeRedditDelicious

Display Huawei ONT Configuration in Huawei OLT was last modified: October 26th, 2015 by Shahed

Comments

comments

11 Responses to Display Huawei ONT Configuration in Huawei OLT

  1. Ganesh varma says:

    Hi shahed thanks for your infermation and the above MA5600 OLT your not using 10G port and how to configure up link port in SCUN board and i seen in your web site gponsolution.com your given each onu saparate VLAN in same way i trayed but after native vlan command it’s working only one VLAN how can i configure multi VLAN’s and VOIP setup in OLT please help me

  2. MUSTAQEEM says:

    Assalam o ALIKUM BROTHER ,

    BHAI I AM NEW IN THIS FIELD SO I WANT TO SOME HELP FOR YOUR SIDE . I HAVE MIKROTIK BOARD AND I WANT TO CONFIGURE PPTP RUSSIA ID IN MIKROTIK . I HAVE 3 ID 4 , 4 , 4 MB . SO CAN ITS POSSIBLE TO CONFIGURE ID I MIKROTIK BOARD ?

  3. Lukas says:

    How do I get ONT 0 ip address?

  4. Ferdi says:

    Dear Shahed

    I wanna ask you some questions about huawei OLT MA5603 configuration

    how to input ip to ont ?
    to be able aggregate switch ping to ont ?

    Thanks

  5. Nishad p says:

    Hi I m new to Gpon technology want to buy huawei Gpon but confused in model nos

    My user base is currently 1500 want to keep provision for 2500 users + value added services like iptv

    Which model is suitable for me ma5680t or ma5608

    Please guide

  6. badra says:

    Dear Sir, please how to get password to view certain informations

  7. Marlon says:

    I have a third party ONT connected to the Huawei OLT, this ONT is managed by the OMCI mode, the issue is that OLT is sending the configuration of the ETH ports to be isolated; this was verified after analyzing the OMCI messages between the OLT and ONT, how can I disable the ETH ports isolation on the OLT for this particular ONT?

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.

error: Content is protected !!