About Author

Traffic Shaping Configure ZTE OLT

by ShahedMay 12, 20160

Traffic Shaping Configure ZTE OLT [boxads] Today i will be discuss how to traffic shaping configure ZTE OLT. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: Traffic shaping controls the speed rate of the output packets so that the packets are sent at a constant speed. Traffic shaping is used to match the packet speed rate to that of the receiving device, to avoid congestion or packet discarding. Traffic shaping caches packets which exceed rate limit, to ensure that the packets are sent at a constant speed. Traffic …

by ShahedMay 12, 2016May 12, 20160

Traffic Limit Configure ZTE GPON OLT [boxads] Today i will be discuss how to Traffic Limit Configure ZTE GPON OLT. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: Traffic limit restrains bandwidth limit of certain service traffic. When the service bandwidth exceeds the limit, the optional actions are as follows: Discard or forward the packets. Modify DSCP of the packets. Modify drop precedence of the packets. To configure the traffic limit, perform the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use …

by ShahedApril 27, 20160

UAPs Uplink master slave port configure ZTE OLT [boxads] Today i will be discuss how to UAPs Uplink master slave port configure ZTE OLT Prerequisites: Make sure that the network device works normally. Uplink ports work normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: ZXA10 C220 supports UAPS. When the working uplink port is faulty, the service is switched to the backup uplink port automatically. To configure the UAPS, perform the following steps: 1. Use the configure terminal command to enter global configuration mode. 2. Use the uaps-group command to configure UAPS group. 3. Use the …

by ShahedApril 27, 2016April 27, 20160

Link Aggregation Configure ZTE GPON OLT [boxads] Today i will be discuss how to Link Aggregation Configure ZTE GPON OLT. Prerequisites: Make sure that the network device works normally. Uplink ports work normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: LACP is a method to control the bundling of several physical ports together to form a single logical channel. LACP allows a network device to negotiate an automatic bundling of links by sending LACP packets to the peer (directly connected device that also implements LACP). The logical channel on the ZXA10 C220 is called smartgroup, which …

by ShahedApril 27, 2016April 27, 20160

TACACS Configure in ZTE OLT [boxads] Today i will be discuss how to TACACS Configure in ZTE OLT. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: TACACS+ is an AAA protocol. TACACS+ supports independent AAA functions, allowing different TACACS+ security servers to work as the authentication, authorization, and accounting servers. To configure the TACACS+, perform the following steps: 1. Use the configure terminal command to enter global configuration mode. 2. Use the tacacs enable command to enable TACACS+ function. 3. Use the tacacs-server host command to configure TACACS+ …

by ShahedApril 27, 20160

RADIUS Configure in ZTE OLT [boxads] Today i will be discuss how to RADIUS Configure in ZTE OLT. Prerequisites: Make sure that the network device works normally. Log in to the ZXA10 C220 through HyperTerminal or Telnet. Context: RADIUS is a standard AAA protocol. The ZXA10 C220 supports RADIUS authentication for Telnet user. To configure the RADIUS, perform the following steps: Step-1. Use the configure terminal command to enter global configuration mode. Step-2. Use the radius authentication-group command to configure RADIUS authentication group. Step-3. Use the server command to configure RADIUS server. Step-4. Use the algorithm command to configure RADIUS …